08 Oct

1:72 Pre-1950s Soviet Concrete Hex Slab Airfield Display Plinths

Display your 1:72 scale pre-1950’s Soviet aircraft collection in style with this set of detailed, realistically weathered concrete hex slab display plinths. Our pack comes with four different concrete finishes to choose from. The plinths are available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

1-72-Pre-1950-soviet-hex-slap-airfield-plinths

Each airfield plinth design comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Four designs are included in this pack as follows:

 

Our Soviet 1:72 Hex Slab Display Plinths are supplied as a single set of four designs. We also have a set of Runway Surface Plinths available for 1:72 scale models too.

Plinth Dimensions:

190mm x 255mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:72 scale aircraft kits.

1:72 Scale Pre-1950’s Soviet Hex Slab Display Plinths (contains 4 designs) – £2.99

05 Oct

1:72 Victorian 7′ Brick Wall Kit

Add detail to your 1:72 scale military dioramas with this versatile 7′ Victorian Recessed Brick Wall kit supplied in easy to use, download and print Adobe PDF format. Featuring recessed brick panels it has a wide variety of uses for 1:72 scale modellers. The kit is very easy to assemble and uses recycled card to form all the base layers, keeping construction costs to a minimum. High resolution, heavily weathered texture wraps are then used on each component for the final finish with no cut card edges visible.

victorian-wall-preview

The kit can also be assembled as a single sided wall which is ideal for blending backscenes at the rear of your diorama.

Supplied with a heavily weathered red brick finish and includes the following features:

  • Fully weathered finish for ultimate realism.
  • Recessed brick panels.
  • Brick pillars to disguise joins between wall sections.
  • Can be assembled single sided or double sided.
  • Build over 60″ of wall (single sided) or over 30″ (double sided) from a single print.
  • Available to download and print instantly.

Step-by-step instructions are included giving great results for modellers of all ages and abilities.

Fully compatible with all brands of 1:72 scale kits including Airfix, Revell & Tamiya.

7′ Victorian Recessed Brick Wall Kit – OO/HO @ £1.99

02 Oct

1:32 Race Track Display Plinths For Slot Cars & Models

Display all your slot car, diecast or scale model car collection in style with these easy to assemble 1:32 scale Race Track Display Plinths. Supplied as a set of two as a high resolution Adobe PDF file, ready to download and print on any colour InkJet or Laser printer.

Slot-Car-Display-Plinths

Created using real photographs and photographic textures for the most realistic appearance possible. Each plinth measures 140mm x 200mm x 10mm when assembled, and is fully compatible with all 1:32 scale models and slot cars. Alternatively, the race track texture sheet can be used on top of an MDF, Ply, Balsa or Foam Board plinth of your choice.

Each plinth comes with a weathered asphalt race track surface complete with tyre marks for a true-scale look. Additional sections are also included to add extra depth to the raised kerbs and grassed areas. Further detailing to the grassed areas could also be added with static grass (not included).

The plinths are ideal for displaying those un-boxed eBay purchases and your pride and joys alike! The two plinth designs included in this pack are:

 

(Note, to display slot cars with all wheels on the track, it may be necessary to either remove the front guide blade, or cut a small slot in the top of the plinth to accommodate the guide blade.)

Fully compatible with all Tamiya, Airfix, Revell, AutoArt, Saico, Scalextric, Ninco, Carrera, SCX, Slot.It and all other brands of 1:32 scale slot racing systems, scale model kits and diecast cars.

1:32 Scale Race Track Advertising Banners – Twin Pack – £2.49

02 Oct

1:32 Slot Racing / Diecast Diorama Advertising Banners

Add detail and realism to your 1:32 scale slot racing circuit with these sets of advertising banners. Just download, print and glue into place. Fit all Scalextric and Carrera trackside barriers, or they can be fixed to your own homemade barriers and hoardings too. Each advertising banner strip measures approx 20mm high x 240mm long.

1-32-slot-racing-trackside-advertising-banners

There are currently 2 sets available as follows:

 

Fully compatible with all Scalextric, Ninco, Carrera, SCX, Slot.It and all other brands of 1:32 scale slot racing systems.

1:32 Scale Race Track Advertising Banners – Twin Pack – £2.25

1:32 Scale Race Track Advertising Banners – Set 1 – £1.49

1:32 Scale Race Track Advertising Banners – Set 2 – £1.49

30 Sep

Modern 1:48 British Royal Navy Aircraft Carrier Deck Display Plinths – Set 3

Display your 1:48 scale British aircraft collection in style with this set of modern Royal Navy “Invincible Class” aircraft carrier display plinths. Each design focuses on a different area of the carrier deck. Each plinth is available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

preview-british-modern

Each deck plinth comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Three designs are included in this pack as follows:

We also have another set of Aircraft Carrier Deck Plinths available for 1:48 scale models too.

Plinth Dimensions:

380mm x 255mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:48 scale aircraft kits.

1:48 Scale Modern British Royal Navy
Aircraft Carrier Deck Plinth – Set 1 (contains 3 designs) – £2.99

30 Sep

1:72 Helicopter Deck Display Plinths – Set 1

Display your 1:72 scale modern model helicopter collection in style with this set of detailed, realistic helicopter deck display plinths. Our pack comes with three designs to choose from, based on those found on modern  frigates and destroyers. Each plinth is available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

preview-helicopter-decks-1-72

Each deck plinth design comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Three designs are included in this pack as follows:

Our Modern 1:72 Helicopter Deck Plinths are supplied as a single set of three designs. We also have a set of Runway Surface Plinths available for 1:72 scale models too.

Plinth Dimensions:

190mm x 255mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:72 scale aircraft kits.

1:72 Scale Helicopter Deck Plinths – Set 1 (contains 3 designs) – £2.49

30 Sep

1:72 British Royal Navy Aircraft Carrier Deck Display Plinths – Set 1

Display your 1:72 scale modern British aircraft collection in style with this set of detailed, realistic British Royal Navy “Invincible Class” aircraft carrier display plinths. Each design focuses on a different area of the carrier deck. Each plinth is available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

british-royal-navy-modern-carrier-decks-1-72

Each deck plinth design comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Three designs are included in this pack as follows:

 

Our Modern British Royal Navy Carrier Deck Plinths are supplied as a single set of three designs. We also have a set of Runway Surface Plinths available for 1:72 scale models too.

Plinth Dimensions:

190mm x 255mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:72 scale aircraft kits.

1:72 Scale British Royal Navy Aircraft Carrier Deck Plinths – Set 1 (contains 3 designs) – £2.49

30 Sep

WWII 1:32 Japanese Navy Aircraft Carrier Deck Display Plinths – Set 1

Display your 1:32 scale WWII aircraft collection in style with this set of brown, wooden aircraft carrier display plinths. Each design focuses on a different area of the carrier deck including the lift section. Each plinth is available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

preview-japanese

Each deck plinth comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

 

We also have another set of Aircraft Carrier Deck Plinths available for 1:32 scale models too.

Plinth Dimensions:

380mm x 510mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:48 scale aircraft kits.

1:32 Scale WWII Japanese Aircraft Carrier Deck Plinth – Set 1 (contains 2 designs) – £2.99

30 Sep

WWII 1:32 US Navy Aircraft Carrier Deck Display Plinths – Set 2

Display your 1:32 scale WWII aircraft collection in style with this set of brown, wooden aircraft carrier display plinths. Each design focuses on a different area of the carrier deck including the lift section. Each plinth is available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

WWII-Carrier-Plinths-1-32-set2

Each deck plinth comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

 

We also have another set of Aircraft Carrier Deck Plinths available for 1:32 scale models too.

Plinth Dimensions:

380mm x 510mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:32 scale aircraft kits.

1:32 Scale WWII Aircraft Carrier Deck Plinth – Set 2 (contains 2 designs) – £2.99

30 Sep

WWII 1:32 US Navy Aircraft Carrier Deck Display Plinths – Set 1

Display your 1:32 scale WWII aircraft collection in style with this set of aircraft carrier display plinths. Each design focuses on a different area of the carrier deck including the lift section. Each plinth is available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

WWII-Carrier-Plinths-1-32-set1

Each deck plinth comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

 

We also have another set of Aircraft Carrier Deck Plinths available for 1:48 scale models too.

Plinth Dimensions:

380mm x 510mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:32 scale aircraft kits.

1:32 Scale WWII Aircraft Carrier Deck Plinth – Set 1 (contains 2 designs) – £2.99

19 Sep

WWII 1:48 Japanese Navy Aircraft Carrier Deck Display Plinths – Set 1

Display your 1:48 scale WWII aircraft collection in style with this set of brown, wooden aircraft carrier display plinths. Each design focuses on a different area of the carrier deck including the lift section. Each plinth is available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

preview-japanese-1-48

Each deck plinth comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

 

We also have another set of Aircraft Carrier Deck Plinths available for 1:48 scale models too.

Plinth Dimensions:

380mm x 255mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:48 scale aircraft kits.

1:48 Scale WWII Japanese Aircraft Carrier Deck Plinth – Set 1 (contains 2 designs) – £2.49

19 Sep

WWII 1:48 US Navy Aircraft Carrier Deck Display Plinths – Set 2

Display your 1:48 scale WWII aircraft collection in style with this set of brown, wooden aircraft carrier display plinths. Each design focuses on a different area of the carrier deck including the lift section. Each plinth is available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

WWII-Carrier-Plinths-1-48-set2Each deck plinth comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

 

We also have another set of Aircraft Carrier Deck Plinths available for 1:48 scale models too.

Plinth Dimensions:

380mm x 255mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:48 scale aircraft kits.

1:48 Scale WWII Aircraft Carrier Deck Plinth – Set 2 (contains 2 designs) – £2.49