19 Oct

1:200 Runway & Apron Display Plinth Set

Looking for an easy way to display your 1:200 scale civilian model aircraft in style? Why not build your own runway with our versatile runway and apron set. Download, print and build the perfect diorama for displaying your model aircraft in minutes!

1-200th-runway-apron-set

Each section of runway and apron can be assembled as either a 6mm high plinth or you can use the top surface sheets on your own diorama base such as a sheet of plywood or MDF. The surfaces can be tiled in a number of ways allowing you to customise the runway to your own requirements. The runway surfaces are supplied with a pristine finish, allowing you to weather them as required to get the look you desire. (We recommend spraying the deck surface with clear matt vanish before applying weathering).

The pack comprises of no less than 7 different sheets:

We also have a set of Runway & Apron Display Plinths available for 1:400 scale models too.

Plinth Dimensions:

Each section is 190x255mm which can then be tiled to your requirements.

Fully compatible with all 1:200 scale aircraft kits & diecast models.

1:200 Scale Runway & Apron Set – £6.49

14 Oct

Modern 1:48 Large Aircraft Carrier Deck Display Plinths – Set 2

A second set of larger 1:48 Modern US Navy Aircraft Carrier Deck Plinth tops suitable for displaying models up to 510mm (27m/89ft) long by 380mm (18m / 59ft) wide. Each plinth is available as a download and print card plinth top surface that is fully compatible with most colour laser and inkjet printers. These plinth surfaces are designed to be mounted  on your own MDF, Mahogany, Ply, Balsa or Foam Board plinth.

1-48-large-us-navy-aircraft-carrier-decks-set2-preview

Each deck plinth surface comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

We also have a set of Weathered Concrete Airfield Plinths available for 1:48 scale models too.

Plinth Dimensions:

510mm x 380mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:48 scale aircraft kits.

1:48 Scale Large Modern Aircraft Carrier Deck Plinth – Set 1 (contains 2 designs) – £3.49

14 Oct

Modern 1:48 Large Aircraft Carrier Deck Display Plinths – Set 1

A larger version of our 1:48 Modern US Navy Aircraft Carrier Deck Plinth tops suitable for displaying models up to 510mm (27m/89ft) long by 380mm (18m / 59ft) wide. Each plinth is available as a download and print card plinth top surface that is fully compatible with most colour laser and inkjet printers. These plinth surfaces are designed to be mounted  on your own MDF, Mahogany, Ply, Balsa or Foam Board plinth.

1-48-large-us-navy-aircraft-carrier-decks-set1-preview

Each deck plinth surface comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

We also have a set of Weathered Concrete Airfield Plinths available for 1:48 scale models too.

Plinth Dimensions:

510mm x 380mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:48 scale aircraft kits.

1:48 Scale Large Modern Aircraft Carrier Deck Plinth – Set 1 (contains 2 designs) – £3.49

14 Oct

Modern 1:72 Large Aircraft Carrier Deck Display Plinths – Set 2

A second set of larger version of our 1:72 Modern US Navy Aircraft Carrier Deck Plinths suitable for displaying models up to 380mm (27m/89ft) long by 255mm (18m / 59ft) wide. Each plinth is available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

large-1-72-us-carrier-deck-plinths-set-2-preview

Each deck plinth comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

We also have a set of Runway Surface Plinths available for 1:72 scale models too.

Plinth Dimensions:

380mm x 255mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:72 scale aircraft kits.

1:72 Scale Large Modern Aircraft Carrier Deck Plinth – Set 2 (contains 2 designs) – £2.99

14 Oct

Modern 1:72 Large Aircraft Carrier Deck Display Plinths – Set 1

A larger version of our 1:72 Modern US Navy Aircraft Carrier Deck Plinths suitable for displaying models up to 380mm (27m/89ft) long by 255mm (18m / 59ft) wide. Each plinth is available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

large-1-72-us-carrier-deck-plinths-set-1

Each deck plinth comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

We also have a set of Runway Surface Plinths available for 1:72 scale models too.

Plinth Dimensions:

380mm x 255mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:72 scale aircraft kits.

1:72 Scale Large Modern Aircraft Carrier Deck Plinth – Set 1 (contains 2 designs) – £2.99

10 Oct

1:48 Weathered Concrete Airfield Display Plinths

Your 1:48 scale model aircraft deserve to be displayed in style and our Weathered Concrete Airfield Display Plinths are perfect for the job. Realistically weathered 12′ square concrete slab surface for excellent realism straight from your desktop printer. The plinth is supplied as as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinth can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

1-48-concrete-airfield-display-plinth

Our Weathered Concrete Plinths come with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

This 1:48 Display Plinth is supplied as an individual plinth but they can be tiled to give a larger surface area. Just print and build as many as you need from a single download.

Plinth Dimensions:

256mm x 260mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:48 scale aircraft kits.

1:48 Scale Weathered Concrete Airfield Display Plinth – £2.29

10 Oct

1:48 Post-1950s Soviet Concrete Rectangular Slab Airfield Display Plinths

Display your 1:48 scale post-1950’s Soviet aircraft collection in style with this set of detailed, realistically weathered concrete hex slab display plinths. Our pack comes with two different designs to choose from: Plain & with “Stop” markings. The plinths are available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

1-48-Post-1950-soviet-rectangular-slab-airfield-plinths

Each airfield plinth design comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

 

Our Soviet 1:48 Rectangular Slab Display Plinths are supplied as a single set of two designs. We also have a set of Pre-1950’s Hex Slab Airfield plinths available for 1:48 scale models too.

Plinth Dimensions:

380mm x 255mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:48 scale aircraft kits.

1:48 Scale Post-1950’s Soviet Rectangular Slab Display Plinths (contains 2 designs) – £2.49

10 Oct

1:48 Pre-1950s Soviet Concrete Hex Slab Airfield Display Plinths

Display your 1:48 scale pre-1950’s Soviet aircraft collection in style with this set of detailed, realistically weathered concrete hex slab display plinths. Our pack comes with four different concrete finishes to choose from. The plinths are available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

1-48-Pre-1950-soviet-hex-slap-airfield-plinths

Each airfield plinth design comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Four designs are included in this pack as follows:

 

Our Soviet 1:48 Hex Slab Display Plinths are supplied as a single set of four designs.

Plinth Dimensions:

380mm x 255mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:48 scale aircraft kits.

1:48 Scale Pre-1950’s Soviet Hex Slab Display Plinths (contains 4 designs) – £3.69

08 Oct

1:72 Weathered Concrete Airfield Display Plinths

Your 1:72 scale model aircraft deserve to be displayed in style and our Weathered Concrete Airfield Display Plinths are perfect for the job. Realistically weathered 12′ square concrete slab surface for excellent realism straight from your desktop printer. The plinth is supplied as as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinth can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

1-72-concrete-airfield-display-plinth

Our Weathered Concrete Plinths come with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

This 1:72 Display Plinth is supplied as an individual plinth but they can be tiled to give a larger surface area. Just print and build as many as you need from a single download. We also have a set of Runway Surface Plinths available for 1:72 scale models too.

Plinth Dimensions:

190mm x 190mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:72 scale aircraft kits.

1:72 Scale Weathered Concrete Airfield Display Plinth – £1.99

08 Oct

1:72 Post-1950s Soviet Concrete Rectangular Slab Airfield Display Plinths

Display your 1:72 scale post-1950’s Soviet aircraft collection in style with this set of detailed, realistically weathered concrete hex slab display plinths. Our pack comes with two different designs to choose from: Plain & with “Stop” markings. The plinths are available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

1-72-Post-1950-soviet-rectangular-slab-airfield-plinths

Each airfield plinth design comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

 

Our Soviet 1:72 Rectangular Slab Display Plinths are supplied as a single set of two designs. We also have a set of Runway Surface Plinths available for 1:72 scale models too.

Plinth Dimensions:

190mm x 255mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:72 scale aircraft kits.

1:72 Scale Post-1950’s Soviet Rectangular Slab Display Plinths (contains 2 designs) – £2.29

08 Oct

1:72 Pre-1950s Soviet Concrete Hex Slab Airfield Display Plinths

Display your 1:72 scale pre-1950’s Soviet aircraft collection in style with this set of detailed, realistically weathered concrete hex slab display plinths. Our pack comes with four different concrete finishes to choose from. The plinths are available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

1-72-Pre-1950-soviet-hex-slap-airfield-plinths

Each airfield plinth design comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Four designs are included in this pack as follows:

 

Our Soviet 1:72 Hex Slab Display Plinths are supplied as a single set of four designs. We also have a set of Runway Surface Plinths available for 1:72 scale models too.

Plinth Dimensions:

190mm x 255mm x 6mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:72 scale aircraft kits.

1:72 Scale Pre-1950’s Soviet Hex Slab Display Plinths (contains 4 designs) – £2.99

05 Oct

1:72 Victorian 7′ Brick Wall Kit

Add detail to your 1:72 scale military dioramas with this versatile 7′ Victorian Recessed Brick Wall kit supplied in easy to use, download and print Adobe PDF format. Featuring recessed brick panels it has a wide variety of uses for 1:72 scale modellers. The kit is very easy to assemble and uses recycled card to form all the base layers, keeping construction costs to a minimum. High resolution, heavily weathered texture wraps are then used on each component for the final finish with no cut card edges visible.

victorian-wall-preview

The kit can also be assembled as a single sided wall which is ideal for blending backscenes at the rear of your diorama.

Supplied with a heavily weathered red brick finish and includes the following features:

  • Fully weathered finish for ultimate realism.
  • Recessed brick panels.
  • Brick pillars to disguise joins between wall sections.
  • Can be assembled single sided or double sided.
  • Build over 60″ of wall (single sided) or over 30″ (double sided) from a single print.
  • Available to download and print instantly.

Step-by-step instructions are included giving great results for modellers of all ages and abilities.

Fully compatible with all brands of 1:72 scale kits including Airfix, Revell & Tamiya.

7′ Victorian Recessed Brick Wall Kit – OO/HO @ £1.99