29 Oct

1:76 Weathered Victorian Red Brick Paper

A sheet of downloadable weathered Victorian Red Brick paper in 1:76 scale, ideal for scratchbuilding a number of structures and buildings on your diecast dioramas and model layouts. Produced from hand-edited, real-life photographic textures to give the most realistic appearance possible from your printer with minimal fuss.

OO-1-76-VictorianBrick-preview

Supplied as an A4 (297x210mm) Download & Print Adobe .PDF file which is compatible with all inkjet & colour laser desktop printers.

Victorian Weathered Red Brick Paper @ £1.49

28 Oct

1:43 Two Lane Highway Texture Sheet

Create your own stylish 1:43 scale diecast display plinth or diorama with this download and print, high resolution rural two lane highway texture sheet. Simply download the Adobe .PDF file and print it on your colour inkjet or laser desktop printer to create a stunning, realistic surface texture on which to display your prized diecast collection.

1-43-two-lane-highway-preview

Includes full instructions for printing and use. Creates a display surface up to 380mm x 255mm in size which can be easily trimmed to suit your requirements. The surface texture is supplied as a two sheet set designed for printing directly onto A4 or Letter size paper.

This high-quality, photo-realistic surface texture also features a narrow grass verge at the sides of the road, weathered road markings and a worn, pot-holled asphalt area at one end for added realism.

 

Compatible with all makes of diecast cast & plastic kit including:

  • Oxford Diecast, Corgi, Burago, Maisto, AutoArt, Dinky, Tamiya, Airfix and many more.

1:43 Two Lane Highway – Price: £1.99

26 Oct

1:43 / 1:48 Scale French Rural Diorama

Display your 1:43 / 1:48 Diecast & plastic models in style, with our realistic, yet easy to build French rural scene diorama. Available to download and print instantly, this versatile kit is perfect for showing off your model collection.

1-43-french-rural-scene

Includes full instructions for printing onto 200 – 250gsm card and construction.

This detailed diorama has room to accommodate most 1:43 and 1:48 scale car models and you can print and build as many as you need from a single download for your own personal use.

Compatible with all makes of diecast cast & plastic kit including:

  • Oxford Diecast, Corgi, Burago, Maisto, AutoArt, Dinky, Tamiya, Airfix and many more.

1:43 / 1:48 French Rural Diorama – Price: £2.29

26 Oct

1:72 Scale Large Concrete Airfield Surface

Create your own, complete 1:72 concrete airfield diorama with our weathered concrete airfield sheets which can be tiled to cover an area up to 570mm x 456mm. Supplied in easy to view & print Adobe .PDF file format to suit A4 desktop printers, or can be printed out at your local printing bureau. The pack comprises of 6, high resolution, individually weathered sheets to create a realistic concrete airfield surface in minutes.

1-72-concrete-airfield-surface

Further additional weathering can be applied when tiling multiple sheets over a larger area as required to disguise repeats. For best results, print onto matt photo-quality inkjet or laser printer paper.

Ideal for displaying Revell, Airfix, Tamiya & Italeri kits.

1:72 Concrete Airfield Sheet Price: £6.99

26 Oct

1:72 Motion Blurred Modern US Aircraft Carrier Deck Surface

Achieving the illusion of speed in a model aircraft diorama is always tricky, especially during take-off and landing scenes. This is the first in a new range of motion blurred display plinth surfaces which make creating the perfect take-off & landing aircraft dioramas a breeze! The plinth surface is supplied as as a download Adobe PDF file and is fully compatible with most colour laser and inkjet printers and once printed can be mounted on top of your own MDF, Mahogany, Ply, Balsa or Foam Board plinth.

1-72-Special-Edition-Motion-Blurred-Modern-Carrier-Deck-Base

Full instructions are included for printing and mounting the plinth along with simple guidelines for positioning and mounting your models too.

This 1:72 Display Plinth Surface is supplied as single sheet in Adobe PDF format. Just print and build as many as you need from a single download. More motion blurred plinths coming very soon.

Plinth Dimensions:

255mm x 190mm approx.

Fully compatible with all Airfix, Revell & Tamiya 1:72 scale aircraft kits.

1:72 Scale Motion Blurred Modern US Aircraft Carrier Deck Surface – £1.99

25 Oct

1:48 Large PSP (Marsden) Matting Display Plinths

PSP or Perforated Steel Plates were used for taxiways, hard-standing and runaways surface stabilization at airfields by Allied Air Forces during WWII and after. The prefabricated steel strips, once joined together form a very compact strip grid capable of withstanding the stresses and strains of even the largest aircraft.

PSP strips were often seen at the airfields and bases of RAF and USAAF units in Europe, MTO, CBI, Pacific and several other theatres.

Our 1:48 PSP Matting Plinths are suitable for displaying models up to 380mm long by 255mm wide. The plinth kit comes with two different designs of PSP matting (angled and square on) and can be assembled as either one large, or two smaller plinths. Each plinth is available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

psp-marsden-matting-preview-1-72

Each plinth comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

We also have a set of Aircraft Carrier Deck Plinths available for 1:48 scale models too.

Plinth Dimensions:

Large 380mm x 255mm x 6mm approx,  Small 190mm x 255mm x 6mm approx. Note both sizes can be assembled from a single kit.

Fully compatible with all Airfix, Revell & Tamiya 1:48 scale aircraft kits.

1:48 Scale Large PSP (Marsden) Matting Display Plinths (contains 2 designs) – £3.49

24 Oct

1:72 Large PSP (Marsden) Matting Display Plinths

PSP or Perforated Steel Plates were used for taxiways, hard-standing and runaways surface stabilization at airfields by Allied Air Forces during WWII and after. The prefabricated steel strips, once joined together form a very compact strip grid capable of withstanding the stresses and strains of even the largest aircraft.

PSP strips were often seen at the airfields and bases of RAF and USAAF units in Europe, MTO, CBI, Pacific and several other theatres.

Our 1:72 PSP Matting Plinths are suitable for displaying models up to 380mm (27m/89ft) long by 255mm (18m / 59ft) wide. The plinth kit comes with two different designs of PSP matting (angled and square on) and can be assembled as either one large, or two smaller plinths. Each plinth is available as a download and print card kit that is fully compatible with most colour laser and inkjet printers. The plinths can be assembled in just a few minutes using nothing more than a little PVA glue, craft knife and some 200gsm white card. Alternatively, you can mount the top sheet on your own MDF, Ply, Balsa or Foam Board plinth.

psp-marsden-matting-preview-1-72

Each deck plinth comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

We also have a set of Runway Surface Plinths available for 1:72 scale models too.

Plinth Dimensions:

Large 380mm x 255mm x 6mm approx,  Small 190mm x 255mm x 6mm approx. Note both sizes can be assembled from a single kit.

Fully compatible with all Airfix, Revell & Tamiya 1:72 scale aircraft kits.

1:72 Scale Large PSP (Marsden) Matting Display Plinths (contains 2 designs) – £2.99

24 Oct

1:144 / 1:148 Scale Concrete Airfield Surface

Create your own, complete 1:144 / 1:148 concrete airfield diorama with our weathered concrete airfield sheets which can be tiled to cover as large an area as required. Supplied in easy to view & print Adobe .PDF file format to suit both A3 and A4 desktop printers, or can be printed out at your local printing bureau.

1-148-concrete-airfield-surface

Further additional weathering can be applied when tiling multiple sheets over a larger area as required. For best results, print onto matt photo-quality inkjet or laser printer paper.

Ideal for displaying Revell, Airfix, Tamiya & Italeri kits.

1:144 / 1:148 Concrete Airfield Sheet Price: £4.99

19 Oct

1:48 Post-1950s Soviet Rectangular Concrete Slab Airfield Surfaces – Large

Designed for displaying larger 1:48 scale post-1950’s Soviet aircraft. This set of detailed, realistically weathered concrete hex slab airfield surfaces is the perfect way to create a realistic display plinth or base for your prized model aircraft. Our pack of Rectangular Slab Soviet Airfield surfaces comes with two different concrete finishes to choose from. The airfield surfaces are available as a download and print file that is fully compatible with most colour laser and inkjet printers. Just print the required sections of your chosen surface onto high quality card or photo-quality paper using your desktop printer, then mount onto mounting board, foam-board, plywood, mdf or mahogany to create a superb looking plinth in record time!

1-48-Post-1950-soviet-rect-slab-airfield-large

Each airfield surface design comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

Two designs are included in this pack as follows:

Our Soviet 1:48 Rectangular Slab Surfaces are supplied as a single set of two designs.

Plinth Dimensions:

510mm x 380mm.

Fully compatible with all Airfix, Revell & Tamiya 1:48 scale aircraft kits.

1:48 Scale Post-1950’s Soviet Rectangular Slab Airfield Surfaces – Large (contains 2 designs) – £3.49

19 Oct

1:48 Pre-1950s Soviet Concrete Hex Slab Airfield Surfaces – Large

Designed for displaying larger 1:48 scale pre-1950’s Soviet aircraft. This set of detailed, realistically weathered concrete hex slab airfield surfaces is the perfect way to create a realistic display plinth or base for your prized model aircraft. Our pack of Hex Slab Soviet Airfield surfaces comes with two different concrete finishes to choose from. The airfield surfaces are available as a download and print file that is fully compatible with most colour laser and inkjet printers. Just print the required sections of your chosen surface onto high quality card or photo-quality paper using your desktop printer, then mount onto mounting board, foam-board, plywood, mdf or mahogany to create a superb looking plinth in record time!

1-48-Pre-1950-soviet-hex-slab-airfield-large

Each airfield surface design comes with a realistic weathered finish for added realism with minimal effort, although you can add further weathering if you wish. (We recommend spraying the deck surface with clear matt vanish before applying further weathering).

two designs are included in this pack as follows:

Our Soviet 1:48 Hex Slab Surfaces are supplied as a single set of two designs.

Plinth Dimensions:

510mm x 380mm.

Fully compatible with all Airfix, Revell & Tamiya 1:48 scale aircraft kits.

1:48 Scale Pre-1950’s Soviet Hex Slab Airfield Surfaces – Large (contains 2 designs) – £3.49

19 Oct

1:400 Runway & Apron Display Plinth Set

Looking for an easy way to display your 1:400 scale civilian model aircraft in style? Why not build your own runway with our versatile runway and apron set. Download, print and build the perfect diorama for displaying your model aircraft in minutes!

1-400th-runway-apron-set

Each section of runway and apron can be assembled as either a 6mm high plinth or you can use the top surface sheets on your own diorama base such as a sheet of plywood or MDF. The surfaces can be tiled in a number of ways allowing you to customise the runway to your own requirements. The runway surfaces are supplied with a pristine finish, allowing you to weather them as required to get the look you desire. (We recommend spraying the deck surface with clear matt vanish before applying weathering).

The pack comprises of no less than 7 different sheets:

We also have a set of Runway & Apron Display Plinths available for 1:200 scale models too.

Plinth Dimensions:

Each section is 190x255mm which can then be tiled to your requirements.

Fully compatible with all 1:400 scale aircraft kits & diecast models.

1:400 Scale Runway & Apron Set – £6.49